Rafting in the Drammen River

​

Timber rafting had been taking place in the river since the High Middle Ages, and more and more of the timber had to be transported from the upper parts of the district, where there were still large forests. This applied to both sawn timber and beams that were cut with an axe. The authorities adopted regulations for the rafting and provisions on how large quantities could be cut and sawn on the various saws, but the rafting itself was organized by the lumber merchants in cooperation with each other, but where the largest sawmill owners had the decisive say.

 

The most important timber hinge on Eiker was at Kverk below Skotselv, where the timber was held back and released in quantities no larger than it was possible to sort them when they arrived at the mills. The largest of these sorting hinges was the "Great Hinge" at Nøstetangen, where the timber going to the sawmills in Vestfossen was stopped. Another important hinge was Stenberg, where the beam timber was sorted. There were permanent crews at these hinges, while there was only seasonal work at the smaller hinges and at the quarrying in the tributaries.

From Nøstetangen, the timber was pulled up the Vestfosselva river by horses walking along the riverbank. This work was carried out by "timber carriers". In addition, the sawmills in Vestfossen received a good deal of timber from the area around Eikeren. These logs were tied together in rafts and transported across the lake with sails.

After the logs had been turned into planks and boards at the sawmills, they were chained together in large "mushrooms", often with several thousand boards, and floated down to the board plots at Bragernes. This plank floating was carried out by special workers called "nersetters".

​